Local. Chill. Uncomplicated.
North Central Indiana Call (317) 689-0759

How to Read an NFRC Label: U-Factor, SHGC, VT and Air Leakage

Every new window and door ships with a sticker full of decimals. Most people peel it off without a second look. That sticker is the NFRC label, and once you know what each number means, it’s the most honest spec sheet you’ll get while comparing windows.

Quick answer: An NFRC label lists independently certified energy ratings for the whole window or door. U-factor shows how well it keeps heat in (lower is better). SHGC shows how much of the sun’s heat gets through (lower blocks more). VT shows how much daylight comes in (higher is brighter). Air leakage shows how much air passes through the unit itself (lower is tighter, and 0.3 or less is the common benchmark).

Key takeaways

  • U-factor is the number to watch first in a cold-winter climate like Central Indiana.
  • In the ENERGY STAR Northern zone, which includes Hamilton County, a window needs a U-factor of 0.22 or lower with an SHGC of at least 0.17, or a slightly higher U-factor paired with a higher SHGC.
  • Only compare labels for the same size, glass package and configuration.
  • The label rates the product. It says nothing about how well it’s installed.

What an NFRC Label Is (and What It Isn’t)

The National Fenestration Rating Council is an independent nonprofit that certifies the energy performance of windows, doors and skylights. “Fenestration” is just the industry word for openings in a building. Participating manufacturers have their products rated by accredited labs using the same test and simulation methods, so a U-factor from one brand means exactly the same thing as a U-factor from another.

That’s the good part. Now the limits.

The label won’t estimate your utility bill savings. It also isn’t the ENERGY STAR label; ENERGY STAR uses NFRC ratings to certify products, but that shows up as its own mark with climate zones shaded in. And it doesn’t rate installation at all. NFRC says this plainly on its own FAQ page: a great product installed poorly won’t perform the way the label suggests.

One more thing most people don’t know. According to NFRC, a product without the sticker isn’t considered certified, even if the seller says it is. Labels can’t be emailed or handed over separately.

The Parts of an NFRC Label at a Glance

Label sectionWhat it tells youWhat to check
Manufacturer and product lineWho made it and which seriesIt matches the product on your quote
Product descriptionFrame material, number of panes, Low-E coating, gas fill (argon or krypton), spacer type, gridsIt matches the exact configuration you’re buying
CPD / certification numberThe product’s ID in NFRC’s Certified Products DirectoryLook it up to verify the ratings
U-factorHeat loss through the whole unitLower is better
Solar Heat Gain Coefficient (SHGC)Solar heat let inDepends on climate and which way the window faces
Visible Transmittance (VT)Daylight let inHigher means brighter rooms
Air Leakage (AL), optionalAir passing through the unit0.3 or lower; lower is tighter
Condensation Resistance (CR), optionalHow well it resists interior condensationHigher is better

U-Factor: How Well the Window Holds Heat

U-factor measures how fast heat moves through the entire product: glass, frame, sash and spacer combined. It’s expressed in Btu/h·ft²·°F, but you only need to remember one rule. The lower the U-factor, the less heat escapes. NFRC lists a typical range of 0.20 to 1.20, though high-performance triple-pane windows now go below 0.20.

If you think in insulation R-values, just flip the number (R is roughly 1 divided by U):

U-factorApprox. R-valueWhere it fits
1.00R-1Old single-pane glass
0.30R-3.3Entry-level dual-pane Low-E
0.22R-4.5ENERGY STAR Northern zone ceiling
0.17R-5.9High-performance triple-pane

Even R-6 is a long way from an insulated wall, which is why U-factor deserves the most attention in a heating-heavy place like Central Indiana. For context, the triple-pane line in our window replacement lineup rates at 0.17, which is close to the top of what residential windows achieve today. If you’re weighing glass packages, our breakdown of triple-pane vs dual-pane windows in Indiana goes deeper.

A quick warning about brochures. Some list a center-of-glass U-factor, which only measures the middle of the glass, far from the frame. It always looks better than the whole-window number. The NFRC label uses whole-window ratings, so stick with those when you compare.

Solar Heat Gain Coefficient (SHGC): How Much Sun Heat Gets In

SHGC measures the share of the sun’s heat that ends up inside, whether it passes straight through the glass or gets absorbed and released inward. It runs from 0 to 1. A lower number blocks more solar heat.

Here’s where people trip up. Lower isn’t automatically better in a cold climate. Winter sun through a south-facing window is free heat, and ENERGY STAR actually sets a minimum SHGC of 0.17 in the Northern zone to keep very dark, heat-blocking glass from qualifying where it doesn’t make sense. Its alternate path even lets a window get away with a slightly higher U-factor if its SHGC is higher.

Orientation matters too. A big west-facing window that bakes the kitchen on July afternoons benefits from a lower SHGC. A south-facing living room might welcome a bit more. That said, most homes do fine with one balanced glass package throughout; splitting packages usually only makes sense for a large wall of west or south glass.

Visible Transmittance (VT): How Much Daylight You Keep

VT measures how much visible light passes through, again on a 0 to 1 scale. Higher means brighter rooms. Because it’s a whole-window rating, frame width counts: a chunky frame lowers VT even with identical glass. Each extra pane and coating layer trims it a little too.

A handy trick is the light-to-solar-gain ratio (LSG). Divide VT by SHGC. The U.S. Department of Energy considers glass with an LSG of 1.25 or higher “spectrally selective,” meaning it lets in daylight while holding back a good share of solar heat. A window with a VT of 0.50 and an SHGC of 0.30 has an LSG of about 1.67. That’s a good sign.

Air Leakage (AL): The Draft Rating

Air leakage measures how much air passes through the window or door assembly, in cubic feet per minute per square foot of product area (cfm/ft²). Labs test it under a pressure difference of 75 pascals, which works out to roughly a 25 mph wind pushing on the unit. Lower is tighter.

  • 0.3 or lower: the ceiling ENERGY STAR uses for windows, and the limit most energy codes follow
  • 0.1: about as low as you’ll see printed, since ratings are rounded to the nearest tenth
  • Swinging doors: ENERGY STAR allows up to 0.5

Operating style plays a big role. Casement and awning windows close by pressing the sash against the weatherstripping, so they tend to post very tight numbers. Fixed picture windows don’t open, so there’s little path for air at all. Sliders and hung windows rely on seals that move, which is harder to keep perfectly tight.

Keep in mind that air leakage is optional on the label. If it’s missing, ask for it.

The bigger caveat: AL only measures air moving through the unit, not around it. Gaps between the frame and the wall opening are an installation issue the label can’t see, and they’re a common reason a brand new window still feels drafty. Our guide to what causes drafty windows covers this, and the choice between full-frame and pocket window replacement affects how well that perimeter gets sealed.

Condensation Resistance: The Optional Extra

Some labels include Condensation Resistance (CR), scored from 1 to 100. Higher means the product is better at resisting moisture forming on the interior surfaces. It’s a relative ranking, not a promise, because indoor humidity drives condensation more than anything else. Still, it’s worth a glance for bathrooms and kitchens, where January mornings can fog up glass fast.

Does It Qualify for ENERGY STAR in Central Indiana?

The ENERGY STAR climate zone finder places Hamilton County, which covers Carmel, Fishers, Westfield and Noblesville, in the Northern zone. If you live elsewhere, check your own county. Here are the current Version 7.0 window criteria for the Northern zone:

U-factorRequired SHGCPath
0.22 or lower0.17 or higherPrescriptive
0.23 to 0.240.35 or higherEquivalent energy performance
0.25 to 0.260.40 or higherEquivalent energy performance

For doors, ENERGY STAR requires a U-factor of 0.17 or lower for opaque doors (no glass) and 0.26 or lower in the Northern zone for doors that are more than half glass, a group that includes most sliding patio doors.

On the ENERGY STAR label itself, qualifying zones are shaded on a small U.S. map. A product can qualify for several zones at once. If only North-Central is shaded, it doesn’t meet Northern zone criteria.

A side note for 2026: the EPA and the Department of Energy agreed this year to shift management of ENERGY STAR to DOE. The Version 7.0 criteria above are still what the official climate zone finder lists, but it’s worth confirming on energystar.gov right before you buy.

Reading a Door Label Works a Little Differently

Door labels often look like a grid instead of a single set of numbers. Each row covers a different glass option or door style, with a U-factor and SHGC for each, and the circled or marked value is the one that applies to the door in front of you. Opaque doors only need a U-factor, since there’s no glass to admit sun.

If you’re shopping for entry doors, the door material and glass choice change those numbers more than most people expect. Our comparison of steel vs fiberglass entry doors explains why.

A Sample Label, Decoded

Here’s how we’d read a typical label. These are example values, not a specific product.

RatingValueWhat it means
U-factor0.22About R-4.5; right at the Northern zone ceiling
SHGC0.28Above the 0.17 minimum; a moderate, balanced number
VT0.47LSG of 0.47 ÷ 0.28 = 1.68, so spectrally selective
Air leakage0.1About as tight as labels report

Verdict: it qualifies for ENERGY STAR in the Northern zone.

Now change one number. Same window, but the U-factor is 0.24. With an SHGC of 0.28, it no longer meets Northern zone criteria (that U-factor needs an SHGC of 0.35 or higher). It would still qualify in the North-Central zone. Two windows that look almost identical on paper, and only one is ENERGY STAR certified for a home in Carmel.

Common Mistakes When Comparing NFRC Labels

  • Comparing different configurations. Grids, glass packages and gas fills each change the rating. The label on a showroom sample may not match the unit on your quote.
  • Trusting “as low as” numbers. Marketing figures usually describe the best possible configuration. Ask for the rating of the exact unit you’re buying.
  • Chasing the lowest SHGC. In a cold climate, very low SHGC glass can cost you useful winter sun and make rooms feel dim.
  • Forgetting the installation. The label assumes the window is installed correctly. Air sealing and insulation around the frame are on the installer.
  • Skipping verification. Plug the CPD number into NFRC’s Certified Products Directory to confirm the ratings are real and current.

FAQs

Is a lower U-factor always better?

For keeping heat in, yes. But returns shrink as you go lower, and U-factor works alongside SHGC and VT. A window with a great U-factor and very dark glass might keep heat in while making rooms gloomy. Look at all the numbers together.

Can I find the ratings for the windows already in my house?

Sometimes. Many windows have a small etched mark in a corner of the glass with the manufacturer’s name and codes. With those, you or a window pro may be able to trace the product. Older windows often have nothing useful left to go on.

Does a good NFRC label mean I won’t have drafts?

Not on its own. The label covers air moving through the window, not gaps around it. A tight air leakage rating plus careful installation is what actually keeps drafts out.

Holding a couple of quotes with different labels and not sure which numbers matter for your house? The Window Shop Of North Indy is always glad to walk through them with you, no strings attached.

Request your free, no pressure window replacement quote

Request your free, no pressure door replacement quote

Request your free, no pressure window replacement quote

Rated 5/5 Stars On Google!
Get Your Fast, No Pressure Window Replacement Quote!

The owner will reach out to you directly to get you a price and answer any questions you have!

Rated 5/5 Stars On Google!
Get Your Fast, No Pressure Window Replacement Quote!

The owner will reach out to you directly to get you a price and answer any questions you have!